LC/SC/DALI Series: Smart Lighting Control

The smart lighting products, are generally designed for building automation, easy cabling, installation and setup. The LC and SC series support Modbus and DCON protocols; the DALI series is a DALI converter. According to the demands, user can control lighting with digital input directly or via RS-485 communication.  The main applications are the group lighting control, dimmer scenes, electric curtains, HVAC, security and other automation controls. Customers can build a smart home/building automation system combine with the Hub and TouchPAD module. 
 

Features

►Support Modbus RTU and DCON communication protocols

Support the industry standard Modbus protocol and the DCON string protocol for easy integrating the third-party devices.
 

►Control via digital input and RS-485 communication

Provide two methods to control the Relay output:  directly from the digital input, or via the RS-485 communication, or both.



 

LC Series: Lighting Control Module

Lighting Control / Dimmer Control 



LC-103H is an easy-to-use lighting control module that requires no special skills to install and operate, and no software is needed in order to control the DO channels. The auto-control and traditional real switches can coexist through this perfect solution to incorporate traditional switches into advanced automation control.




LC-223H provides two-stage brightness for dimmer control. 
When no one enters the detection range, the lamp will remain at the 10% brightness.

When people enters, the lights will switch to the brightness range from 10% to 100%.
When people leave the area, the fixtures will return back to default 10% brightness.






LC-322H is a 2-ch relay output loop with load current measurement module that provides the total current of all lamps on the control loop circuit and can use the relay to turn ON/OFF the current loop. In the lighting control application, the value of the load current feedback can help to know whether the equipment on the loop circuit is working well or fail, whether the ageing equipment needs to replace a new one, whether the relay is still sticky on, and so on.




 

DALI Series

DALI Gateway





DGW-521 is a communication gateway between the Modbus RTU/DCON and the DALI (Digital Addressable Lighting Interface) protocols, and allows a Host PC, PAC, or TouchPAD to access DALI devices by providing three interfaces that enable conversion from RS-232/RS-485/USB to DALI. The module provides a built-in DALI power supply that can be enabled or disabled via a switch. DALI is an international standard for lighting control interfaces, and is suitable for DALI lighting systems covering small areas. The maximum length of the DALI signal cables cannot exceed 300 m.







Lighting Control
Model  Relay Output   AC Digital Input
Channel Type Max. Load Current Channel Type On Voltage Level Off Voltage Level
LC-101H 1 Power Relay, Form C  NO: 16 A 
NC: 16 A 
1 90 ~ 240 VAC 65 VAC 60 VAC
LC-102H 2 Power Relay, Form C  NO: 16 A 
NC: 16 A 
2 90 ~ 240 VAC 65 VAC 56 VAC
LC-103H 3 Power Relay, Form A 16 A  1 90 ~ 240 VAC 85 VAC 60 VAC
 
Lighting Control: Load Current Feedback Measurement
Model Relay Output with Load Current Feedback Analog Input Digital Input
Channel Type Range Channel Range Channel Range
LC-305 5 AC Load Current Input: 0 ~ 5A -
LC-322H    2 Power Relay Form A: 16A with AC Load Current Input: 0~5A - 2 DI: 90 ~ 240 VAC
 
Lighting Control: Dimmer 
Model Relay Output Analog Output Digital Input
Channel Type Load Current Recommend Working Current Inrush Current (Max.) Number of Lighting (Max.) Channel Type Resolution Channell Type Voltage Level
LC-223H 1 Power Relay, Form A Max. 16A (Res.) Max. 0.6A @ 250 VAC Max. 125 A/600uS Incandescent Lamp: 40W/ 220 VAC * 8 Sets 1 0 to 20 mA,
4 to 24 mA,
0 to 10 V,
1 to 10 V
12-bit 1 90 to 240 VAC ON:65/
OFF:58 VAC
2 Dry Contact ON: Close to AGND
OFF: Open 
 
Lighting Control: Digital Dimmer (DALI Gateway)
Model  Input Channel Output Channel Connector Other
DGW-521 1 X RS-485/RS-232
1 X USB (Virtual COM) 
1 X DALI 2-pin Terminal Block Built-in DALI power (DC 16 VDC ± 5%, max. current 250 mA)
Security
Model Relay Output Digital Input
Channel Type Max. Load Current Channel Type On Voltage Level  Off Voltage Level
LC-131 1 Power Relay, Form A 16 A 3 Dry Contact Close to DI.COM Open